Exmark 52" Turf Tracer

Exmark 52" Turf Tracer
Brand: Exmark
Product Code: TTS541GKA52300
Availability: Call for Pricing
Price: $0.00
Call for PricingInquire Now   - OR -   Add to Wish List
Add to Compare

SPECIFICATIONS FOR MODEL # TTS541GKA52300

Equipment  
Steering Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
Casters .38" thick caster yoke arms
Front Caster Tires 9 x 3.5-4, smooth-tread, semi-pneumatic.
Drive Tires 16 x 7.5-8, 4-ply Turf Master®
Safety Package Operator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
Parking Brake Lever-actuated mechanical compression.
Electrical No battery, recoil start w/ 5 amp clutch coil
Cup Holder No
Power Components  
Engine Model FS541V
Engine Brand Kawasaki®
Engine Series V-Twin
Engine Speed 3,600 rpm
Air Filter Standard Engine Manufacturer's air filter
Drive Description Twin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1\\" (2.54 cm) tapered shafts.
Speed Infinitely variable speed selection from 0– 6.2 mph (10 kmph) forward, 0–2.2 mph (3.5 kmph) reverse.
PTO Engagement Electromagnetic 105 ft-lbs clutch.
Fuel Capacity 5-gallon (18.9-L) fuel tank.
Drive Wheel Release Allows unit movement without engine running.
Deck Lift Manual lift with hairpin from hole to hole for position adjustment.
Engine Type Carbureted
Engine Displacement 603
Drive Hydro-Drive
Fuel Indicator None
Carb Compliant No
Fuel Type Gas Carbureted
Decks  
Deck Style Floating Deck
Deck Style Description Full-floating UltraCut Series 3, side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck 52"
Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge welded spindle mounting locations for improved strength.
Cutting Heights 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments.
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Blade Tip Speed Approximately 18,500 fpm.
Blades 3 Blades at 18.00" Length
Dimensions  
Width 64.3 in. (163.3 cm)
Length 75.9 in. (192.8 cm)
Height 42.0 in. (106.7 cm)
Curb Weight 670

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: