Exmark 42" Quest E Series

Exmark 42" Quest E Series
Brand: Exmark
Product Code: QTE452CEM42100
Availability: In Stock
Price: $0.00

SPECIFICATIONS FOR MODEL # QTE452CEM42100

Equipment  
Blade Spindles No maintenance, sealed and non-greasable spindles; 5.50"-diameter cutter housing with 0.67"-diameter spindle shaft.
Drive Tires 18 x 7.50-8, 2-ply Turf Tech TL
Cup Holder Standard
Tractor Frame Unibody, Riveted 10 ga. Steel
Steering Control Hydraulically dampened twin levers, adjustable both fore and aft. Levers are also adjustable to 2 height positions.
Front Caster Tires 11 x 4-5 ribbed tread, pneumatic
Parking Brake Lever-actuated pawl brake.
Seat High Back foam padded with armrests. Hinged mounting, spring suspension. \nAdjustment: Fore and aft 3 in. by loosening 2 bolts and sliding seat.
Electrical 12-volt battery with 15-amp alternator.
Power Components  
Engine Brand Exmark
Engine Model 452
Engine Displacement 452
Engine Series Single
Engine Type Carbureted
Engine Speed 3,300 rpm
Air Filter Standard Engine Manufacturer's air filter
Fuel Type Gas Carbureted
Fuel Capacity High-capacity, 2.9-gallon (11.0-L), single fuel tank with single fill location.
Fuel Indicator Translucent Visual
Drive Hydro-Drive
Drive Description Two Hydro-Gear ZT2100 hydro static transmissions with no hoses, integrated cooling fans, integrated reservoir.
Speed Infinitely variable speed selection from 0–7 mph (11.3 km/h) forward. 0–3.4 mph (5.5 km/h) reverse.
Carb Compliant Yes
Deck Lift Standard; lever lift.
Safety Package Operator Presence Controls (OPC) and drive system interlock.
ROPS None
PTO Engagement MagStop electromagnetic 80-ft-lbs clutch
Drive Wheel Release Allows unit movement without engine running.
Casters .25" thick caster yoke arms
Decks  
Width / Cutting Deck 42"
Deck Style Floating Deck
Deck Style Description Exmark Series-1 stamped steel deck. Side discharge standard with the option to bag or mulch.
Deck Construction 10-gauge top that is formed and welded, 12-gauge side skirt and 7-gauge welded bumper.
Blade Tip Speed Approximately 18,500 fpm.
Cutting Heights 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.5" (1.3 cm) increments, adjustable from operator seat with standard lever lift.
Blades 2 Blades at 21.60" Length
Dimensions  
Width 53.8 in. (136.7 cm)
Length 71.8 in. (182.4 cm)
Height 40.7 in. (103.4 cm)
Curb Weight 555

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: