Exmark 60" Lazer E ZTR

Exmark 60" Lazer E ZTR
Exmark 60" Lazer E ZTR Exmark 60" Lazer E ZTR Exmark 60" Lazer E ZTR Exmark 60" Lazer E ZTR Exmark 60" Lazer E ZTR
Brand: Exmark
Product Code: LZE730KA604
Availability: Call for Pricing
Price: $0.00
Call for PricingInquire Now   - OR -   Add to Wish List
Add to Compare

Lazer Z® E-Series: The definition of value.

The E-Series is the perfect choice for professional landscape contractors who want the innovative engineering and\ncommercial-grade quality of a Lazer Z, but in a value package. The E-Series features the same welded, heavy-duty, 1.5" x 3" tubular steel unibody frame found on more expensive Lazer Z models. You can also choose from three rugged Kawasaki® V-Twin engines or a Kohler® Command™ EFI engine matched to 48-, 52- or 60-inch, full-floating, UltraCut™ Series 4 cutting decks. A digital operator diagnostic module simplifies system monitoring and troubleshooting, while the fuel gauge uses ultrasonic waves to provide a more accurate reading. In short, the Lazer Z E-Series strikes a perfect balance of value and performance.

  • Safety plus convenience: Our Rollover Protection System (ROPS) is engineered for more than safety. Its rear-sloping design also diverts branches away from the operator. And it folds easily for transport.
  • Single-point height adjust: This simple system lets you adjust deck height without resetting rake and level. Set height of cut from 1 to 5.5 inches by simply moving a bolt.
  • On-board diagnostics: Check vital functions at a glance on the digital screen. An electronic fuel gauge, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.
  • Hydro drive simplified: Our hydro drive system has no hoses to leak and just two, easy-to-change belts. Only simple, annual maintenance is required. It also lowers the center of gravity for improved handling.
Lazer Z E-Series Specifications

LZE730KA604) LAZER E SERIES FX730V KAWASAKI WITH 60" ULTRACUT SERIES 4 DECK

POWER COMPONENTS
Engine: Kawasaki®
Model: FX730V
Displacement: 730
Air Filter: Heavy-duty canister air filtration system
Drive System: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Speed: Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
PTO Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
Fuel Capacity: 8-gallon (30.3-L) single fuel tank with single fill location.
Drive Wheel Release: Allows unit movement without engine running.
Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Rollover Protection System (ROPS): 2-post foldable ROPS standard with seat belt and latch.
Casters: .50" thick caster yoke arms.
Cup Holder: Standard
CARB Compliant: No
DECKS
Deck Construction: 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Deck Style: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width: 60" (152.4 cm)
Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Cutting Heights 1.0" (2.5 cm) to 5.5" (14.0 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
Blades 3 Blades at 20.50" Length
Blade-Tip Speed Approximately 18,500 fpm.
EQUIPMENT
Tractor Frame: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Steering Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires: 13 x 6.50-6, smooth-tread, pneumatic.
Drive Tires 24 x 12-12 Super Turf®
Parking Brake Lever-actuated disc brake.
Seat Commercial Grade High Back contoured foam padded with armrests. Adjustment: Fore and aft from Operators’ Position.
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98")diameter spindle shaft and splined blade driver.
Electrical 12-volt battery with 15-amp alternator.
MISCELLANEOUS
Curb Weight: 1115 lbs
Length: 83.1 in. (211.1 cm)
Width: 72.8 in. (184.9 cm)
Height: 70 in. (177.8 cm)
Warranty: 2 Year Comm / 4 Year Cons

 

 

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: